Introduction of Pier and Pile
Important Point
The pile and the piers are two different types of deep foundations which are widely used in the construction. It is necessary that you should know the difference between a pile foundation and a pier foundation. In this article, you will get to know the difference between the Pier and Pile foundation.
What Is Pier?
A pier is basically a raised structure that is constructed to support a well-based foundation system. A Pier foundation is a large diameter of cylinder column which is used to support the superstructure load and transfer it to underneath soil strata. Pier foundation is generally constructed at a shallow depth.
Types of Pier Foundation
The types of pier foundation are as follows
- Drilled caissons pier foundation.
- Drilled concrete pier foundation.
- Concrete in steel shell pier foundation.
- Concrete and steel pier foundation.
Also, Read: Floating Slab Vs Monolithic Slab | What Is Monolithic Slab | What Is Floating Slab
What Is Pile?
Pile is basically a column that is inserted in underneath started to transmit the structural load to the lower level of the subsoil strata. A Pile foundation is a type of deep foundation in which the total loads are transferred to the underneath strata by means of the vertical member.
In the case of the pile foundations, the loads are transferred by means of the vertical member. The piles are made up of different materials such as timber, concrete, and steel.
Pile foundations are generally constructed at a greater depth. Pile foundations are used for the construction of Megastructures such as bridges and flyover.
Types of Pile Foundations
The types of pile foundations are as follows
- End bearing piles foundation.
- Compaction pile foundation.
- Anchor pile foundation.
- Friction pile foundation.
- Dolphin and fender piles foundation.
- Tension or uplift piles foundation.
- Sheet and batter piles foundation.
- Combined end bearing and friction piles foundation.
Difference Between Pier and Pile
Pier |
Pile |
Pier foundation is a type of deep foundation that basically consists of a cylindrical column of large diameter. | A Pile foundation is a type of deep foundation in which the loads are transferred to a low level by means of vertical timber, steel, or concrete. |
Pier foundation are adopted when there is firm bearing strata are available but at such a depth the construction of other types of foundation are not economical. | Pile foundations are adopted when there is no firm bearing strata of soil is available at its reasonable depth. |
Pier is drilled with the help of a drill machine. | Piles are driven through the overburden soils into the load-bearing strata. |
Pier foundation transfers the total load through the bearing only in the underneath strata. | Pile foundation transfer the load in the underneath starter through the friction as well as bearing. |
Pier foundations are generally constructed on the shallower depth. | Pile foundation is generally constructed on the greater depths. |
Pier foundations are constructed to resist the small intensity of loads. | Pile foundations are constructed to resist the greater intensity of load. |
The types of pier foundations are masonry or concrete piers and drilled caissons. | The types of pile foundations are anchor piles, uplift piles, sheet and batter piles, friction piles, bearing piles, etc. |
Piles are always below ground level. | Pier are always above the ground level. |
Also, Read: H-Beam vs I-Beam | What Is H-Beam | What Is I-Beam
What Is Pier?
A pier is a raised structure that rises above a body of water and usually juts out from its shore, typically supported by piles or pillars, and provides above-water access to offshore areas. Frequent pier uses include fishing, boat docking and access for both passengers and cargo, and oceanside recreation.
What Is Pile In Civil?
Pile, in building construction, a postlike foundation member used from prehistoric times. In modern civil engineering, piles of timber, steel, or concrete are driven into the ground to support a structure; bridge piers may be supported on groups of large-diameter piles.
Pier vs Pile
Piles consist of vertical pillars made from concrete or steel. Piers are similar in size and shape. Piles are often used when the soil lacks firm strata, such as bedrock. Piles are usually meant for supporting greater loads, such as highway bridges.
Pier and Pile
Pier foundation consists of cylindrical columns to support and transfer large superimposed loads to firm strata. Piles are driven through the overburden soils into the load-bearing strata. Piers are drilled with the drill machine.
Difference Between Pier and Pile
Pier foundation consists of cylindrical columns to support and transfer large superimposed loads to firm strata. Piles are driven through the overburden soils into the load-bearing strata. Pile foundation is required to resist greater loads like a load of bridge or flyover.
Piers Meaning
a platform supported on pillars or girders leading out from the shore into a body of water, used as a landing stage for boats.
Define Pier
a support for a bridge. : a structure built out into the water for use as a landing place or walk or to protect or form a harbor.
Difference Between Pile and Pier
The main differences between the pier and pile foundation are given below. In pile foundation, the loads are transferred by means of vertical timber, concrete or steel. Pier foundation consists of cylindrical columns to support and transfer large superimposed loads to firm strata.
Piles Vs Piers
Piles are usually meant for supporting greater loads, such as highway bridges. Learn more about when to use concrete piles. Piers are meant for smaller applications, such as sheds and small living units.
What Is a Pier?
A pier is a raised structure that extends over a body of water, such as a lake, river, or ocean. It is typically supported by pillars, piles, or columns that are driven into the ground or constructed on top of a submerged foundation. Piers are built to provide a stable platform for various purposes, including docking or mooring boats, fishing, recreational activities, and pedestrian access.
Pier Foundation Vs Pile Foundation
Piers are similar in size and shape. Piles are often used when the soil lacks firm strata, such as bedrock. Piles are usually meant for supporting greater loads, such as highway bridges. Piers are meant for smaller applications, such as sheds and small living units.
Pier Meaning
A raised structure extending over a body of water, typically supported by pillars or piles, used for various purposes such as docking boats, fishing, or recreational activities.
Piers in Construction
A pier, in architecture, is an upright support for a structure or superstructure such as an arch or bridge. Sections of structural walls between openings (bays) can function as piers. External or free-standing walls may have piers at the ends or on corners.
Based on What We Differentiate Between Pile and Drilled Pier?
Drilled Pier vs Pile: Comparison at a Glance
Piles consist of vertical pillars made from concrete or steel. Piers are similar in size and shape. Piles are often used when the soil lacks firm strata, such as bedrock. Piles are usually meant for supporting greater loads, such as highway bridges.
Pile Vs Pier Foundation
the main difference between a pile foundation and a pier foundation lies in the depth and method of load transfer. Pile foundations are deeper and rely on the end-bearing or skin friction of the piles to support the structure, while pier foundations are shallower and distribute the load over a larger footing area. The choice between these two foundation types depends on factors such as soil conditions, building loads, and project requirements. Consulting with a structural engineer or foundation specialist is advisable to determine the most suitable foundation system for a specific project.
Piers Construction
According to the definition, The Piers, are the vertical support structures of bridges. They are the intermediate supports, whose function is to transmit the forces they receive from the load-bearing elements to the foundations.
Pile Foundation Vs Column Foundation
Pile: a long slender column usually of timber, steel, or reinforced concrete driven into the ground to carry a vertical load. Column: a supporting pillar; especially: one consisting of a usually round shaft, a capital, and a base.
Pier in Civil Engineering
In civil engineering, the term “pier” typically refers to a vertical supporting structure that helps bear the weight of a bridge, viaduct, or elevated roadway. Piers are designed to transfer the load from the bridge or structure to the ground or foundation below. They are constructed to provide stability, withstand lateral forces, and ensure the safety and integrity of the overall infrastructure.
Like this post? Share it with your friends!
Suggested Read –
- Drilled Pier
- What is a Pile Cap in Construction
- Top 10 Cement Companies in USA
- Top 15+ Best Plywood Brands in India
- Top 10 Best Cement Companies In India 2021
- Top 10 Bathroom Fittings & Sanitary Brands India
- What Is Grouting | Types of Grouting | Advantage of Grouting
- What Does Parapet Mean | Types of Parapet Wall | Uses of Parapet Wall
- Cinder Block Vs Concrete Block | What Is Cinder Blocks | What Is Concrete Blocks
- Monolithic Definition | Monolithic Footing | Monolithic Slab Foundation | Advantages & Disadvantages of Monolithic Slab Foundation | Monolithic Slab
Leave a Reply