Introduction of Roof Storm Damage Checklist
Important Point
This article serves as a wind damage roof inspection guide, providing essential steps to follow after a storm damages your roof.
Generally, a roof is replaced after thirty years; in the real world, there are so many things that can damage your roof, and repair, or inspection work is needed.
In America, there is a huge problem due to storms where roof repair work is required.
In your country, if there is no massive issue with the storm, you can also follow those steps. So, here are some steps for roof storm damage prevention and repair.
What to Do After a Storm on Roof?
After passing the storm, we need to determine the number of damages, so here are some steps.
- Start with the Protruding Roof Parts: First, we check the damaged parts of the skylights, chimneys, and other protruding roof parts. Those parts must be sealed properly to avoid water leaks. Then we need necessary actions for those damages.
- Inspect the Exterior Shingles: Due to storms, the roofs of the houses are damaged widely because they protect you as a front-line defense against tough outdoor weather conditions. Then we check curling, granular loss, cracked shingles, missing shingles, etc. We need to hire a roofing contractor for inspection purposes or use a binocular.
- Examine the Roof Vents: Sometimes, the roof’s soffit and fascia are also damaged and vents are also damaged or warped, then outdoor air comes inside.
- Inspect the Gutters: Generally, the gutters divert the rainwater away from the house. Sometimes, the gutters get clogged, and then water backs up under the singles and starts leaking. Gutters are clogged due to the hip of twigs, leaves, and other debris on the roof shingles.
- Check the Attic and Ceilings: If the damage has happened in the outside portion of the roof, then you need to check the attic and ceiling for signs of water spots. Wind and hail are the main causes of invisible leaks, which is very disturbing; you need to check those by using a flashlight.
Useful Article for You
- What Is a Contour Interval
- What Is Tile
- What Is the Difference Between a Shower Pan and a Shower Base?
- What Is a Window Panel
- Type of Arch
- What Is a Frame Structure
- What Is the Measurement for a Queen Size Bed
- What Is Considered Livable Space
- What Is One Way You Can Save Electricity?
- What Is Mdf Mean
- What Is a Bundle of Shingles
- What Is a Gallon of Water Weigh
- What Is Overhang
- What Is Sand Blasting
- What Is a Span Bridge
- What Is a Soil Stack
- What Is the Little Black Diamond on a Tape Measure
- What Is a Louvered Door
- Cracking Moment Formula
- What Is a Spread Footing
- What Is Leveling
- What Is Pedestal
- Different Types of Beam
- What Is Plumbing Fixtures
- What Is a Highway Flyover
- What Is Slab Construction
- What Is Calacatta Quartz
- What Is Auxiliary View
- Sheepsfoot Roller
- Live Load Vs Dead Load
- What Is 1 Flight of Stairs
- What Is Refractory Cement
- Dry Pack Concrete
- What Is Luminous Flux Vs Lumens
- What Is a Frost Wall
- Types of Cement in Civil Engineering
- What Is an Undercoat
- What Is Road Pavement
- What Is a Moment Frame
- Arch Foundation
- What Is a Stair Landing
- What Is Stone Masonry
- What Is a Spandrel Beam
- What Is Pier and Beam Foundation
- What Is Levelling
- What Is a Pile Cap
- What Is a Mat Foundation
- What Is a Floating Slab
- What Is the Purpose of Foundation
- What Is Modulus of Rupture
- What Is a Flush Door
- What Is a Weep Hole
- What Is Residential Construction
- What Is Cinder Block
- What Is a Concept Sketch
- What Is Tie Beam
- What Is the Best Foundation for a House
- What Is Oblique Drawing
- What Is a Benchmark in Surveying
- What Is a Engineering Drawing
- What Is an Admixture
- What Is a Monolithic Slab Foundation
- What Is the Standard Size Water Supply Line
- What Is the Difference Between Tension and Compression?
- What Is False Ceiling
- What Is a Parapet Wall
- What Is a Caisson in Construction
Types of Roof Storm Damage
Understanding the types of roof damage is crucial, as different storms cause various damages, each requiring a unique approach to repair and prevention.
There are many types of roof storm damage are there,
1. Wind
Wind damage is a common concern, and this section can be considered a part of your storm damage roof inspection.
Storms like hurricanes which have high wind forces can cause severe damage to your roof.
This type of storm wind can tear or remove roof shingles; so, the roof deck is exposed.
Gale winds are slower than hurricane winds and can also cause damage to your roof; they can also curl or lift up the roof shingles.
2. Hail
Hail is that type of storm that stands not more than a quarter of an hour.
At this time, it can cause pockmarks and visible dents in the roof. It also loses the roof shingles, which requires immediate roof repair work.
3. Standing Water
If your roof has not had a proper drainage system, then you must face the issue of standing water problem.
You need to take the necessary actions. Sometimes, clogged gutters are the main cause of standing water.
Here, moisture seeps into the roof deck and creates huge problems.
4. Debris
Due to the heavy storm, debris is hurled onto the roof, and tree branches can create a huge impact on your roof surface. This can cause moisture seeping damage into your roof parts.
Roof Storm Damage Checklist
Following a storm damage inspection, it’s imperative to schedule and conduct a thorough roof inspection to assess the extent of the damage.
A roof is replaced after thirty years; in the real world, there are so many things that can damage your roof, and repair, or inspection work is needed.
In America, there is a huge problem due to storms where roof repair work is required. In your country, if there is no massive issue with the storm.
It damages the roof parts, and it is very dangerous for that house owner also; so, you can also follow those steps.
So, a roof storm damage checklist is the necessary and required action to protect or repair the roofs.
1. Schedule and Conduct a Roof Inspection
Here, we should contact a professional, trusted roofing contractor for inspection of the roof. There are some parameters that a contractor needs to check-
- Roof: At first, the contractor needs to check those damages by walking around the house and taking the required notes. Then you keep the notes and take pictures of that roof damages portion. Visible damages like torn, dented, curled, missing shingles, etc., are noted down for the work.
- Gutters, Vents, and Windows: Then we check the home gutters, roofing accessories, etc., like overhang portion, and gable vents. In windows, we inspect the cracks, loose weather stripping, broken glass, torn screens, etc.
- Outside Areas: After that, the contractor walks around your house to look after fallen trees, posts, damaged lawn furniture, etc., and check flat surfaces like decks, and patios for hail damage.
- Attic and Ceiling: A good professional should inspect and observe the leakage and water spot areas. These leaks can create huge problems in later times. Special attention should be taken to light fixtures, and ceiling water leaks, and flashlights should be used in the dark areas of your roof.
2. Hire a Dependable, Trusted Roofing Contractor
- A dependable contractor can also guide you through the storm damage roof replacement inspection process if a replacement is deemed necessary.
- It’s very necessary to work with a trustable contractor.
- Sometimes roof repair companies offer you a big discount and deals but make sure that the repair qualities are the same as always.
- Generally, roofing contractors can easily assess the damages with professional experience eyes.
- They provide an estimated cost for repair purposes and then start repair or replacement works.
3. Talking to a Trusted Roofing Contractor
- Please contact a licensed, insured contractor who can also provide a warranty for that project after finished.
- Make sure that the roofing contractor is capable of assessing and estimating damage.
- The main thing is you need to check out the contractor’s profile and online reviews and the experience of other people.
Roof Checklist
A roof inspection is when a roofing contractor checks the condition of your entire roof. They’ll check your roof penetrations, your attic’s ventilation, and more.
Useful Article for You
- Zero Force Members
- How Much Does a Yard of Concrete Weigh
- Cmu Wall Meaning
- Gradient Road
- Budget Sunroom Ideas
- What Is Gypsum Board
- Types of Vaulted Ceilings
- Well Points
- How Does Baking Soda Remove Blood from Carpet
- What Are Forms in Construction
- How Heavy Is Dirt
- Tender Meaning in Architecture
- Dark Olive Green House
- Cast in Place Concrete
- Lean to Roof
- How Tall Is an Average Door
- Grade Beam Foundation
- Window Sill Height
- Concrete Cold Joint
- Types of Traps
- Types of Pipe
- Wood Supporting Beams
- Finishing Plaster
- Concrete Wall Finishes
- Home Depot Scrap Wood
- Lvl Beam Size Calculator
- Structural Shell
- Curb Types
- Msand
- Optimum Dry Meaning
- Disadvantages of Low-E Glass
- Bridge Abutment Definition
- Plumbing Joints
- Build Materials List
- Composite Masonry Wall
- Is Cedar a Hardwood or Softwood
- Modified Proctor Test
- Construction Joint Vs Control Joint
- Physical Properties of Sand
- Sugar in Concrete
- Crane Machine Construction
- Types of Gable Roofs
- Different Types of Walls
- Door Frame Types
- How Much Does 55 Gallons of Oil Weigh
- Dog Leg Stairs
- Concrete Salt Finish
- Westpoint Bridge Builders
- Types of Porches
- Hempcrete Disadvantages
- Roof Pitch Types
- Types of Weirs
- Asphalt Floor
- Dutch Roof
- #6 Rebar Weight Per Foot
- Prizmatic Compass
- Bond Break Concrete
- Poured Concrete Wall Cost Calculator
- How Many 60 Lb Bags of Concrete in a Yard
- Wood Fence Post Spacing Chart
- Fly Ash Brick
- Falsework
New Roof Checklist
Here, the roof checklist are as follows, also the Roofing Inspection Checklist PDF file please check.
- General Information
- Name & Adress
- Status of Roof Owner [Applicant, Already Insured, Other (Specify)]
- Name of Application
- Application Number
- Insured Info
- Name of Insured
- Policy Number
- Predominant Roof
- Roof Geometry
- Flat Roof
- Hip Roof
- Mansard Roof
- Tented Roof
- Dutch Gable Roof
- Pavillion Roof
- Helm Roof
- Other
- Covering Materials
- Wood Shingles
- Asphalt Shingles
- Clay Shingles
- Tin
- Tile
- Other
- Roof Age
- Reaming Useful Life
- Date of Last Roofing Permit
- Date Update
- Overall Condition of Roof
- Excellent
- Good
- Fair
- Poor
- Other
- Visible Damage
- Curling
- Lifted
- Loose shingles
- Missing shingles
- Sagging
- Uneven
- Leaks
- Other
- Roof Geometry
- Secondary Roof
- Roof Geometry
- Flat Roof
- Hip Roof
- Mansard Roof
- Tented Roof
- Dutch Gable Roof
- Pavillion Roof
- Helm Roof
- Other
- Covering Materials
- Wood Shingles
- Asphalt Shingles
- Clay Shingles
- Tin
- Tile
- Other
- Roof Age
- Reaming Useful Life
- Date of Last Roofing Permit
- Date Update
- Overall Condition of Roof
- Excellent
- Good
- Fair
- Poor
- Other
- Visible Damage
- Curling
- Lifted
- Loose shingles
- Missing shingles
- Sagging
- Uneven
- Leaks
- Other
- Roof Geometry
- Certification
- Meets Standard
- Yes
- No
- Name of Inspector
- Inspector Phone Number
- Lince Type
- Lince Number
- Signature
- Date
- Time
- Meets Standard
New Roof Inspection Checklist PDF: Click Here (Sorce: fulcrumapp.com)
Roof Estimate Checklist
Below are all the points used for a simple precaution of the roofing estimate checklist. With the help of these points, we can easily calculate the Roof estimate checklist.
- Company Contact Info
- Full Work Description
- Start and Completion Date
- Materials to Be Used
- Total Cost
- Tearing Off the Old Roof
- New Shingle Installation
- Underlayment
- Flashing, Kick-Out Flashing, Counter Flashing
- Lead Pipe Jacks
- Chimney Work
- Ice and Water Barrier
- Ridge or Box Vents
- Flapper Vents
- Gutters
- Cleanup and Dump Fees
- Permits
- Labor
- Warranties
Roof Replacement Checklist
This checklist for roof replacement is a valuable resource for homeowners looking to replace their roofs due to storm damage or other reasons.
Below are all the points used for a simple precaution of the Roofing Replacement Checklist. With the help of these points, we can easily calculate the Roof replacement checklist.
Copies Rqd | ADMINISTRATION CHECKLIST To be completed by Customer Service Centre |
Complete ✓ |
|||||
2 | Geyserview printout (contour plan) checked with Applicant for Correctness | ||||||
1 | Green PIM/BC Master cover has been completed | ||||||
1 | Site Inspection Card completed | ||||||
1 | Applicant Inspection card complete | ||||||
1 | Form 6 (Application for Code Compliance Certificate) attached to Applicant Inspection Card | ||||||
Form 2 administratively complete and front cover signed appropriately | |||||||
Lodgment category cost for building consent is 4A with an additional inspection of ½ hour | |||||||
Applicant S = Supplied N/A= Not Applicable Please arrange an vetting appointment through customer services should you wish to lodge this application in person (2 copies of plans and any relevant specifications to be supplied with the application) |
|||||||
Building Consent No. | Processor Name: | ||||||
Form 2 | Building Consent Application Form completed and signed | S | N/A | P | F | N/A | |
Roofing is defined as “restricted building work”. The design must be completed out by a Licensed Designer? |
Y | N | P | F | N/A | ||
As this project is defined as “restricted building work” a Form 2A (Certificate of Design Work) must be provided. |
Y | N | P | F | N/A | ||
Have all Licensed Building Practitioner’s been identified? | Y | N | P | F | N/A | ||
Site Plan | House plans or Geyser View plan can be used to meet this requirement, request representative from Customer Services to print 2 copies. (indicate area of re-roof on this plan) Owner / Address match Form 2? |
S | N/A | P | F | N/A | |
1 | Detail what type of roofing material exists | S | N/A | P | F | N/A | |
2 | Details of the new of roofing material that is to be used
|
S | N/A | P | F | N/A | |
3 | Roof pitch | S | N/A | P | F | N/A | |
4 | Provide details of any new framing members
|
S | N/A | P | F | N/A | |
5 | Provide flashing details that meet the roofing manufacturers requirements
|
S | N/A | P | F | N/A | |
6 | Wind fixings
(change of roofing product may result in the need to upgrade up lift fixings specifically where a heavy weight roof is replaced by a light weight product) Please circle appropriate site-specific wind loading: Low Medium High Very High Specific Engineer Design |
S | N/A | P | F | N/A | |
7 | Bracing to meet NZS 3604 / NZS 1170 D (change of roofing product may result in the need to increase existing bracing)Detail both existing braces and the proposed (where the bracing is unknown provide new bracing to comply with the relevant building standard)Space, Plane, hip and valley or Gable end wall |
S | N/A | P | F | N/A | |
8 | Penetrations through roofing material
|
S | N/A | P | F | N/A | |
9 | Gutters (are there to be any change to existing gutters or downpipes that are not a direct replacement? Moving location or number of downpipes?)
|
S | N/A | P | F | N/A | |
10 | Ventilation to roof/ceiling space (Membrane, enclosed or skillion roofs) | S | N/A | P | F | N/A | |
11 | Any fire rating issues that need to be addressed e.g. eaves closer than 650mm to boundary clear light roofing no closer that 1.0m to boundary etc. | S | N/A | P | F | N/A | |
12 | Domestic smoke alarm(s) detailed on floor plan (Refer to NZBC F7 for requirements within 3m of sleeping areas and on escape route of each level) | S | N/A | P | F | N/A | |
Additional Fees | |||||||
Please be aware that additional fees may be applied after the lodgment deposit is paid, for inspections, processing, certificates, government levies and the like (discussed?). | Y | N | |||||
RDC use only P = PassF = Non-compliance with the Building Code – further information required N/A= Not Applicable RDC staff to record reasons for decisions in the question text box |
|||||||
Other considerations (waivers and modifications- alternative solutions, TL authors- – section 75, fire rating etc) | |||||||
GRANTING BUILDING CONSENT | |||||||
Sign the application form to grant the building consent once satisfied on reasonable grounds that if the building work was to be constructed in accordance with the approved documents, then compliance with the Building Code will be met. | |||||||
Ref: CPV07 V06 Issued: 21/12/2012 |
Roof Replacement Checklist PDF: Click Here (Source: yumpu.com)
Hail Damage Inspection Checklist
Below are all the points used for a simple precaution of the shingle roof inspection checklist. With the help of these points, we can easily calculate the hail damage inspection checklist.
- Things to Be Inspected
- Individual tiles, shakes, shingles: Any dents, pockmarks, bruising, splits, cracks, splintering mineral loss?
- Overall appearance: E.g. the shininess of asphalt roofing
- Roof vents
- Siding
- The interior ceiling is there any water damage?
- During Your Inspection
- Document any damage with photographs
- Write down any pertinent details of the storm
- Include the date, time & damage details
- Call your insurance company immediately
- Arrange an assessment with your insurance company
Hail Damage Inspection Checklist PDF: Click Here (Source: Civiljungle.com)
Flat Roof Inspection Checklist
Here, the flat Roof Maintenance Checklist are as follows.
1. General Roof Conditions | |
Item | Remarks |
Dean on Roof | |
Drainage | |
Physical Damage | |
Attic Conditions | |
Structural Deformation | |
Other | |
2. Flat / Membrane Roof | |
Item | Remarks |
Condition of Coating | |
Granular Loss | |
Punctures | |
Cracks/Alligatoring | |
Blisters/Fistmouths | |
Ponding | |
Other | |
3. Roof Features | |
Item | Remarks |
Fascia | |
Soffit | |
Flashing | |
Gutters/Drains, etc. | |
Skylights | |
ChimneysNents | |
Fall Arrest Anchors | |
Control Zone Access | |
Other | |
4. Exterior Wall Surfaces | |
Item | Remarks |
Deformed Finish | |
Surface Deterioration | |
Staining | |
Other | |
5. Interior Wall Surfaces | |
Item | Remarks |
Cracks | |
Water Staining | |
Water Leaks | |
Deformed Finish | |
Seasonal Change | |
Window Leaks | |
Door/Window Alignment | |
Other | |
6. Ceiling Conditions | |
Item | Remarks |
Cracks | |
Water Staining | |
Water Leaks | |
Seasonal Change | |
Other |
Flat Roof Inspection Checklist PDF: Click Here (Source: Civiljungle.com)
TPO Roof Inspection Checklist
1. Structure complies to the New Zealand Building Code and concrete complies with NZS 3101 (2006) | ||||||||
2. Concrete cured with curing membranes removed. Concrete substrate contains less than 5% moisture content. | ||||||||
3. Surface smooth and clean with falls as per plan. | ||||||||
4. Cavities and cracks filled, flushed off and cured. | ||||||||
5. Concrete surface firm with any soft concrete or laitance removed. | ||||||||
6. Ponding areas removed. | ||||||||
7. Roof drains and overflow recesses formed to fit rebated outlets. | ||||||||
8. If terminating into a chase, pre-form the chase, straight and 20mm deep. | ||||||||
9. Plinths formed for any exterior ventilation, solar panels or fixtures. | ||||||||
10. Construction joints incorporated in slab as per designers specification. | ||||||||
11. Substrate clean, firm and suitable condition for laying GAF Everguard TPO. |
TPO Roof Inspection Checklist PDF: Click Here (Source: Civiljungle.com)
Roof Maintenance Checklist
Below are all the points used for a simple precaution of the Roof maintenance checklist. With the help of these points, we can easily maintenance the roof checklist.
- Roof Condition
- General
- Debris
- Walkways
- Substrate
- Contaminants
- Leaks
- Drainage
- Roof Drains
- Scuppers
- Gutters
- Downspouts
- Ponding
- Coating
- Bare Spots
- Blisters
- Adhesion
- Cracks
- Pinholes
- Mechanical Damage
- General
- Membrane
- Blisters
- Cracks
- Mechanical Damage
- Bird Damage
- Storm Damage
- Soft & Spongy
- Wet
- Flashing
- Base Flashing
- Counter Flashing
- Coping
- Gravel Stop/facia
- Penetration
- Pipes
- A/c Units
- Vents Skylights
- Expansion Joints
- Ducts
- Walls
Roof Maintenance Checklist PDF: Click Here (Source: PMsilicone.com)
Metal Roof Inspection Checklist
Checklists used during the installation most often check and track activities, progress, and communication items. Each log should include the date and names or initials of key people. This includes not only the person completing the checklist, but also the person(s) performing specific tasks, such as sealing, gutter cleaning, or other trades performing work on the roof. Examples of detailed items a daily checklist
may include are:
- Install underlayment
- Squares installed = _______
- Remove protective film from installed panels
- Check and clean gutters
- Notify electrician
- Notify/schedule HVAC reconnect
- Cover and secure stage material
- Store ladders and lock gate
- Photos
- Clean-up
When such checklists are completed on a regular, or even a daily basis, then filed, a comprehensive record of the installation is created without any additional effort.
A useful, but often overlooked, item to include on a daily log is the addition of a section for random notes of significance. Such notes would include key factors like weather and Jobsite conditions, delays, or injuries, of any nature.
Metal Roof Inspection Checklist PDF: Click Here ( Source: metalconstruction.org)
Roof Preventative Maintenance Checklist
Below are all the points used for a simple precaution of the roof preventative maintenance checklist.
- Cleaning of light organic and inorganic debris from the roof, drains and scuppers as needed.
- Maintenance level repairs to parapet wall flashings as needed (re-secure metal, caulk holes, seal laps, etc.).
- Maintenance level repairs to parapet wall flashing laps and seams as needed (seal open laps or seams with mastic or flashing tape).
- Maintenance level repairs to the exposed masonry parapet wall as needed (temporary caulk open joints or holes; apply small temporary patches as required).
- Temporary maintenance level repairs to the exposed masonry chimney penetrations as needed (temporary caulk open joints or holes; apply small temporary patches as required).
- Maintenance level repairs to rooftop unit flashings as needed (seal open laps or seams with mastic or flashing tape).
- Maintenance level repairs to the roof membrane as needed (seal or tape open seams and laps; minor repair of open splits or blisters; general and limited repairs to membrane conditions currently causing interior water leaks).
- Maintenance level repairs to the roof membrane’s laps and seams as needed (seal open laps or seams with mastic or flashing tape).
- Reset & re-attach existing walk pads as needed.
- Reset existing metal soffit panels as needed and as accessible.
- Maintenance level repairs to pipe flashings as needed.
- Maintenance level repairs to pipe support as needed.
- Maintenance level repairs to metal edging as needed (re-secure loose metal and/or seal open laps).
- Maintenance level repairs to the metal coping as needed (re-secure loose metal and/or seal open laps).
- Maintenance level repairs to metal fascia as needed (re-secure loose metal and/or seal open laps).
- Maintenance level repairs to expansion joints as needed (seal open joints or holes in expansion joint material).
- Maintenance level repairs to area divider/control joints as needed (seal open joints, seams or holes).
- Maintenance level repairs to roof drain, overflow drains, gutters, downspouts, scuppers, and collector heads as needed (caulk or seal open-drain flashings or open metal connection joints as possible).
- Maintenance level repairs to skylights as needed (seal open metal joints or holes).
- Maintenance level repairs to pitch pockets/pourable sealer pockets as needed (top off-pitch pans to allow for watershed).
- Re-fastening of loose metal termination bar as needed (tighten fasteners or replace missing fasteners and touch up open caulking).
- Re-fastening of metal counter flashing as needed (tighten fasteners or replace missing fasteners and touch up open caulking).
- Maintenance level repairs to metal roof areas as needed (tighten loose end-joint fasteners or replace missing fasteners; seal open laps, seams and holes).
- Temporary maintenance level repairs to exposed metal ductwork as needed (temporary duct joint sealing to stop active leaking).
- Temporary maintenance level repairs to roof-related EIFS walls as needed (reseal open EIFS and/or touch up open caulking).
- Redistribute ballast as needed (limited scale and quantity, maintenance level).
- Trim back foliage as needed and possible from roof level. Small tree branches or limited vegetation overgrowth onto a roof that can be removed at a maintenance
- Temporarily repair shingle roof areas that can be safely accessed (re-secure shingles, and/or seal open valleys or flashings).
- Perform an under-deck visual inspection as needed.
- Record and catalog Maintenance Inspection Forms required to sustain the Manufacturers warranty.
- All maintenance level work shall be completed in accordance with OSHA stan
Roof Preventative Maintenance Checklist PDF: Click Here (Source: technicalassurance.com)
Commercial Roof Inspection Checklist
Below are all the points used for a simple precaution of the commercial roof maintenance checklist.
- Interior
- Roof Deck
- Corrosion
- Spalling
- Cracking
- Buckling
- Sagging
- Open Joints
- Overall Deck Condition
- Bitumen Drips
- Other:
- Walls
- Movement
- Setting
- Cracks
- Spalling (Chipping or crumbing)
- Paint Peeling
- Water Strains
- Other:
- Roof Deck
- Exterior
- Walls
- Deteriorated Mortar Joints
- Settlement Cracks
- Stains
- Efflorescence
- Windows
- Fascia Displaced
- Gutter Anchors
- Downspouts
- Gutter General Condition
- Other:
- Walls
- Metal Flashings
- Counter Flashing
- Loose/Missing Fasteners
- Loose/Displaced Metal
- Deformed Metal
- Corrosion
- Loose/Missing Joint Cover
- Check Sealant
- Punctures
- Cracked/Broken Coping Cap
- Open Coping Joint
- Other:
- Coping / Cap Finishing
- Loose/Missing Fasteners
- Loose/Displaced Metal
- Deformed Metal
- Corrosion
- Loose/Missing Joint Cover
- Sealant Joints
- Punctures
- Other:
- Expansion Joints
- Loose/Missing Fasteners
- Loose/Displaced Metal
- Deformed Metal
- Loose/Missing Joint Cover
- Sealant Joints
- Stripped-in Flashing
- Punctures
- Splitting
- Mechanical Damage
- Hinders Drainage
- Other:
- Edge Metal
- Loose/Missing Fasteners
- Loose/Displaced Metal
- Splits in Stripped-in Flashing Joints
- Corrosion
- Loose/Missing Metal Sections
- Loose/Missing Joint Cover
- Open End Joints
- Sealant Joints
- Other:
- Base Flashing
- Exposed Top Seal
- Adhesion
- Seams/Attachment to Field
- Vertical Laps
- Deterioration
- Punctures
- Sagging/Wrinkling
- Excessive Bridging
- Other:
- Counter Flashing
- Penetrations
- General
- Pitch Pocket Sealant
- Loose Flashing
- Drawbands
- Other:
- Drains
- Strainers/Clamping Ring
- Clear of Debris
- Flashing
- Overall Cleanliness
- Other:
- Rooftop Equipment
- Attachment to Curbs
- Access Panels
- Housing
- Liquid Discharge
- Condensation
- Roof Adjacent to Equipment
- Other:
- Conduit or Pipe
- Sagging
- Supports Moving
- Joints
- Corrosion
- Other:
- General
- Membrane/Shingle
- General
- Discoloration
- Coating/Surfacing
- Cracking
- Wrinkles
- Punctures
- Walkways, Displaced
- Walkways, Deteriorated
- Walkways, Needed
- Delamination
- Alligatoring
- Granule Adhesion
- Standing Water
- Vandalism
- Foot Traffic Damage
- Blistering
- Buckling
- Mechanical Damage
- Exposed Felt/Deck
- Hail Damage
- Other:
- Lips
- Open Joints
- Fishmouths
- Other:
- Membrane
- Unadhered Areas
- Blisters
- Loose Insulation
- Fasteners Backing Out
- Ridges
- Other:
- Miscellaneous
- Antennas
- Guy Wises
- Ice or Icicles
- Oil Deposits
- Surface Contamination
- Soft Areas
- Vandalism
- Vegetative Growth
- Other:
- General
- Coating
- General
- Reflectivity (Rating)
- Discoloration
- Adhesion
- Cracking/Peeling
- Crazing
- Other:
- General
- Surfacing
- General
- Type:
- Coverage/Bare spots
- Discoloration
- Gravel Stop
- Other:
- Photographic Record
- Film/Digital Photography
- Video
- Other:
- General
*Mark all items with the appropriate code on the roof plan grid. Keep copies of inspection forms and photographic or other evidence with the Roof Historical Record.
Commercial Roof Inspection Checklist PDF: Click Here (Source: mrca.org)
Residential Roof Inspection Checklist
Below are all the points used for a simple precaution of the residetial roof maintenance checklist.
- Interior
- Roof Deck
- Corrosion
- Spalling (chipping or crumbling)
- Cracking
- Buckling
- Sagging
- Open Joints
- Overall Deck Condition
- Stains/Drips
- Other:
- Walls
- Movement
- Setting
- Cracks
- Spalling (Chipping or crumbing)
- Paint Peeling
- Water Strains
- Other:
- Roof Deck
- Exterior
- Walls
- Deteriorated Mortar Joints
- Settlement Cracks
- Stains
- Efflorescence
- Windows
- Fascia Displaced
- Walls
- Metal Flashings
- Counter Flashing
- Loose/Missing Fasteners
- Loose/Displaced Metal
- Deformed Metal
- Corrosion
- Sealant Joints
- Punctures
- Other:
- Drains/Downspouts
- Strainers/Clamping Ring
- Clear of Debris
- Flashing
- Overall Cleanliness
- Gutter Anchors
- Drains/Downspouts
- Gutter General Condition
- Other:
- Counter Flashing
- Penetrations
- General
- Pitch Pocket Sealant
- Loose Flashing
- Drawbands
- Other:
- Conduit or Pipe
- Sagging
- Supports Moving
- Joints
- Corrosion
- Other:
- General
- Membrane/Shingle
- General
- Discoloration
- Coating/Surfacing
- Cracking
- Wrinkles
- Punctures
- Delamination
- Alligatoring
- Granule Adhesion
- Standing Water
- Vandalism
- Foot Traffic Damage
- Mechanical Damage
- Exposed Felt/Deck
- Hail Damage
- Other:
- Miscellaneous
- Antennas
- Guy Wises
- Ice or Icicles
- Oil Deposits
- Surface Contamination
- Soft Areas
- Vandalism
- Vegetative Growth
- Other:
- Photographic Record
- Film/Digital Photography
- Video
- Other:
- General
*Mark all items with the appropriate code on the roof plan grid. Keep copies of inspection forms and photographic or other evidence with the Roof Historical Record.
Residential Roof Inspection Checklist PDF : Click Here (Source: mrca.org)
What Qualifies as Storm Damage on a Roof?
What storm damage might look like. Sometimes, the signs of roof damage are pretty obvious, like water spots on a ceiling and curled or missing roof shingles. You may also see broken or damaged roof flashing, wet walls, water issues around your home’s exterior, or winter ice damming.
How Do You Storm Proof a Roof?
Use a caulking gun to apply roofing cement on the edges of roof shingles. Use construction adhesive to the rafters or trusses where they connect to the deck. One more inexpensive but effective tip is to install metal hurricane clips. These connect the interior walls of your home to the roof.
What Is Considered Roof Damage?
What is Considered Roof Damage? Roof damage is something that occurs from external forces immediately causing damage vs. regular wear and tear that occurs over time as your roof ages. … Roof damage will look more like missing or cracked shingles, water leaks in your attic, or damaged flashing.
Does Insurance Cover Storm Damage to Roof?
Yes, as noted above, homeowners insurance typically covers most types of wind damage. Usually, the dwelling coverage of your homeowners policy will help pay to repair or replace damage to the roof, siding or windows due to a wind event.
Should I Make a Claim for Wind Damaged Roof?
So, you just had a strong storm and found shingles in your yard. But will your homeowners’ insurance cover the damage to your roof caused by the strong winds? The answer is yes, your homeowner’s insurance should cover wind damage and any other roof damage caused by extreme weather (hail, tornados, fallen limbs, etc.).
How Do You Know You Have Roof Damage?
While you’re examining your roof, look for any drooping or sagging. Make sure to walk around your entire property to check every side. Drooping or sagging could indicate you have a damaged roof on your hands. You might also notice rotting boards or trapped moisture.
Can You Claim for Storm Damage?
Is your property protected against storm damage? As explained above, storm damage is usually covered by your home insurance. But to pay out on a claim, your insurer must be satisfied that you’ve maintained your home to a reasonable standard.
How Much Wind Does It Take to Damage a Roof?
Typically, winds as fast as 70-90 mph (miles per hour) are the starting point for wind that can cause roof damages. However, sometimes a gust at 50 mph can give your roof a beating.
Like this post? Share it with your friends!
Suggested Read –
- Dam Types
- Masonry Joint Types
- Carpet Area Meaning
- Top 15+ Best Plywood Brands in India
- Top 10 Best Cement Companies In India 2021
- What Is an Ice Dam | How to Remove Ice Dam From Roof | What Causes Ice Dams on Roof | How to Remove Ice Dams
- What Is Concrete Screed | Concrete Screed Specifications | Characteristics of Concrete Screed | Advantages & Disadvantages of Concrete Screed
- Fly Ash in Concrete | Advantages & Disadvantages of Fly Ash concrete | Use of Fly Ash in Concrete | Applications for Fly Ash concrete | Benefits of Fly Ash Concrete
Leave a Reply