Introduction of Coarse-Grained Soils Vs Fine-Grained Soils
Important Point
Soil is one of the most important components which should be check and tested before doing any kind of construction on the site.
As a civil engineer, it is very necessary that you should know the difference between coarse-grained soils and fine-grained soil so that you can design the structures accordingly.
The soil mainly divided into two types which are as follows
- Coarse-Grained Soils
- Fine-Grained Soils
In this article, you will get to know the Difference between coarse-grained soils and fine-grained soil. The behavior of both coarse-grained soil as well as fine-grained soil is different from each other.
Also, Read: Unified Soil Classification System Uscs
What Is Coarse-Grained Soil?
The coarse-grained soils are mainly identified on the basis of grain size of the particle size of the soil mass. One of the thumb rules which is used for the identification of coarse-grained soils is that the individual particles of the coarse-grained soils can be seen with our naked eye.
One of an example of coarse-grained soils are sand and gravels. We can easily see the particles of the sand and gravel with our eyes. The particles whose size are larger than 75 mm is known as gravel and the particles whose size are less than 4.75 mm up to 75 microns are known as Sand.
The coarse-grained soils have a good load-bearing capacity as well as drainage quality. There is no volumetric changes are seen in the coarse-grained soils in the moisture condition.
The coarse-grained soil feels gritty when we touch it with our hands. The moisture change in the coarse-grained soil does not affect the strength of the soil. The shape of the coarse-grained soil is generally angular or sub-angular.
What Is Fine-Grained Soil?
Fine-grained soils are generally identified based on their plasticity. The fine-grained soils cannot be seen by our naked eye. The fine-grained soil is basically divided into two groups which are silt and clay.
The particles whose size ranges between 75 microns to 2 microns are known as Silt and the particles whose size smaller than 2 microns is known as clay.
The load-bearing capacity of fine-grained soil is low as compared to coarse-grained soils. The permeability of fine-grained soil is very low. The reason of very low permeability of the fine-grained soil that because of its size of the particle are very small due to which it retains water.
Strength of the fine-grained soil changes with respect to the change in the moisture or the water content of the soil. If you touch the fine-grained soil with your hand you will feel it smooth, greasy, and Sticky.
Also, Read: Core Cutter Method | What is Compaction of Soil
Difference Between Coarse-Grained Soil and Fine-Grained Soil: Respect to the Void Ratio
- Void ratio is defined as the ratio of the volume of voids to the volume of solid. Void ratio is basically a measure of voids in a particular soil mass.
- You may think that the soil particles present in the fine-grained soils are very closely packed with each other so that it may have less void ratio. But in fact, the fine-grained soil has more void ratio as compared to the coarse-grained soil.
- It is because of the concept of the surface area of the particle. The surface area of the fine-grained soils with respect to the soil mass is more as compared to the surface area of the coarse-grained soil.
- The voids created in the fine-grained soils are more with respect to soil mass because of its more surface area whereas in the case of the coarse-grained soils there are less voids are created with respect to their soil mass.
- The clay has a more void ratio as compared to sand
Coarse-Grained Soils Vs Fine-Grained Soils
The difference between coarse-grained soil and fine-grained soil are as follows.
Coarse-Grained Soils | Fine-Grained Soils |
The coarse-grained soil particles can be seen with our naked eye. | The fine-grained soil cannot be seen with our naked eye. |
The coarse-grained soil can be identified on the basis of the particle size of the grain size of the soil. | The fine-grained soil is identified on the basis of the plasticity of the soil. |
The coarse-grained soils have 50% or less material which passes through the sieve number 200. | The fine-grained soil have 50% or more material which passes through the same number 200 |
The load-bearing capacity of the coarse-grained soil is good. | The fine-grained soil has less load-bearing capacity. |
There is no change in the strength of coarse-grained soil with respect to the change of the water content of the soil. | There will be the change in the strength of the fine-grained soil with respect to the change in the water content of the soil. |
The coarse-grained soil feels gritty when it is touched by the hand. | The fine-grained soil feels smooth and sticky when touched by hand. |
The coarse-grained soil does not retain water and has more permeability. | The fine-grained soil has very less permeability and it can retain water. |
There will be no change in the volume of the coarse-grained soil with a change in the moisture content. | There will be a change in the volume of the fine-grained soil with a change in the moisture content. |
The size of the coarse-grained soil particles varies from 4.75 mm up to 75 microns. | The size of the fine-grained soil is less than 75 microns. |
The coarse-grained soil has less void ratio. | The fine-grained soil has more void ratio. |
The shape of the coarse-grained soil particles varies from angular to rounded. | The shape of the fine-grained soils are generally flaky. |
The example of the coarse-grained soil are sand and gravel. | The example of the fine grained soil are silt and clay. |
Also, Read: What Is Soil Compaction | Different Types of Soil Compaction Equipment
Differences Between Coarse-Grained Soil and Fine-Grained Soil
Coarse–grained soil is frequently identified based on particle size or grain size. Individual particles are visible by the naked eye. Fine–grained soils have 50% or more material passing the No.
What Is Coarse-Grained Soil?
Coarse-grained soils are defined as those soils whose individual grains are retained on a No. 200 (0.075 mm) sieve. Grains of this size can generally be seen with the naked eye, although a handheld magnifying glass may occasionally be needed to see the smallest of the grains. Gravel and sand are coarse-grained soils.
What Is Fine-Grained Soil?
Fine–grained soils have 50% or more material passing the No. 200 sieves. Engineering properties such as the strength and compressibility of coarse–grained soil are governed by the grain size of the particles and their structural arrangement. Fine–grained soil is impermeable due to its small particle size.
Coarse-Grained Soil vs Fine-Grained Soil
The physical and mechanical properties of coarse–grained and fine–grained soil are different and they are summarized. Coarse–grained soil is frequently identified based on particle size or grain size. Individual particles are visible by the naked eye. Fine–grained soils have 50% or more material passing the No.
Coarse-Grained Soil
In coarse-grained soils, where the grains are larger than 0.075 mm (or 75 µm), the engineering behaviour is influenced mainly by the relative proportions of the different sizes present, the shapes of the soil grains, and the density of packing. These soils are also called granular soils.
Coarse Soil
Coarse soil refers to a type of soil texture that contains larger particles compared to other types of soil, such as sandy or clay soils. It is characterized by a gritty or granular texture and typically has low water-holding capacity.
Coarse-Grained Meaning
The term “coarse-grained” typically refers to the size and texture of the materials being used. It describes materials that have larger particles or grains compared to fine-grained materials.
Fine Soil
Fine soil refers to soil particles that are small in size and have a smooth texture. It is also known as silt or loam. Fine soil particles are smaller than sand particles but larger than clay particles. They have diameters ranging from 0.002 to 0.05 millimeters.
Coarse-Grained Vs Fine Grained
The word ‘granular’ is used to describe something that is made up of multiple elements. If the elements are small, we call it “fine-grained,” and if the elements are large, we call it “coarse-grained.” These are terms typically used in economics, computer science and geology.
Coarse Soil Information
Coarse-grained soil refers to the soil in which the grains are between 0.075 mm and 60 mm accounting for more than 50% of its total mass.
Coarse Grain Soil
In the context of soil science and geotechnical engineering, “coarse-grained soil” refers to a type of soil that is predominantly composed of larger particles. These particles are typically classified as sands and gravels.
Granular Soil Means
Granular soil means gravel, sand, or silt, (coarse grained soil) with little or no clay content. Granular soil has no cohesive strength. Some moist granular soils exhibit apparent cohesion.
Fine Grain Soil
Fine-grained soil (silt and clay) can appear in different states of consistency, solid, plastic and liquid, for which the boundaries are defined in terms of Atterberg limits, based on moisture content. The two limits associated with plasticity of soil are liquid limit (LL) and plastic limit (PL).
Fine-Grained and Coarse-Grained
Fine-Grained and Coarse-Grained are used to describe the particle sizes in sediments or soils. Fine-grained materials, such as clays and silts, consist of smaller particles, often less than 0.002 mm in diameter. Coarse-grained materials, such as sands and gravels, consist of larger particles, typically ranging from 0.06 mm to several centimeters in diameter.
Size of Coarse Grain
The size of coarse grains can vary depending on the specific material and context. In general, coarse grains are larger than fine grains and can range from several millimeters to centimeters in size.
Fine-Grained Soil Examples
Fine-grained soils are characterized by their small particle sizes, typically smaller than 0.075 millimeters. Here are some examples of fine-grained soils:
- Clay
- Silt
- Silty clay
- Clay loam
- Peat
- Organic clay
Fine-Grained Soil Size
Fine-Grained Soils (50% or More of Material Is Smaller Than No. 200 Sieve Size.)
Difference Between Fine-Grained and Coarse-Grained
Coarse-grained systems consist of fewer, larger components than fine-grained systems; a coarse-grained description of a system regards large subcomponents while a fine-grained description regards smaller components of which the larger ones are composed.
Fine-Grained Sand
Fine-grained sand refers to sand particles that are relatively small in size. The term “fine-grained” typically implies that the sand particles are smaller than those found in coarse or medium-grained sand.
Coarse-Grained Sand
Coarse-grained sand refers to sand particles that are relatively large in size compared to fine-grained sand. The term “coarse-grained” suggests that the sand particles are larger than those found in fine or medium-grained sand.
Like this post? Share it with your friends!
Suggested Read –
- Fine and Coarse
- Coarse Grained Soils
- What Is Defects in Painting | 18 Types of Defects in Painting | How to Prevent Defects in Painting
- What Is Transportation Engineering | Major Disciplines of Transportation Engineering | What Do Transportation Engineers Do
- What Is Sewerage System | Types of Sewerage System | Why We Need a Partially Separate System | How Does a Sewage Treatment Plant Work
- What Is Kelly Ball Test | Test Procedure of Kelly Ball Test | Use of the Kelly Ball | Advantages of Kelly Ball Test | Disadvantages of Kelly Ball Test
- What Is Oblique Drawing | Oblique Drawing Examples | What Is Oblique View | Oblique Projection | Oblique Shape | Cabinet Oblique | What Is Cavalier Drawing
cuttingtechnologies says
It is very crucial to observe the range of particle sizes in soil as it heavily influences the key colloidal properties and has great many engineering implications.