What Is Mass Concrete | Properties of Mass Concrete | Advantage of Mass Concrete | Disadvantage of Mass Concrete |How Much Mass Density of Concrete

By /

all about of Mass Concrete

Mass Concrete:

Large bridge piers, foundations, and such as dams like the massive structure, the mass concreting technique is used. For also, mass concrete strength, economy, uniformity, and other factors considered should take into account.

The temperature shrinkage is the major problem in mass concrete work.

To prevent shrinkage, one must have excellent control of early setting the mass concrete intended for a large structure.

In mass concrete, the water-cement ratio reaction the temperature rise within a large concrete mass.

And in mass concrete, if the heat is not quickly dissipated, it can be quite high.

To restrained volume change associated with a decline in temperature as the heat of hydration is dissipated, significant tensile stress and strain may result.

Also, Read: What Is Underwater Concrete | Advantage & Disadvantage of Underwater Concrete | Application of Underwater Concrete | How Do They Pour Concrete Under Water

What Is Mass Concrete?

What Is Mass Concrete?

In mass concrete, often referred to as mass concrete means, the heat of hydration may increase the temperature considerably due to the greater mass of the concrete.

This type of concrete is known as define mass concrete.

Large bridge piers, foundations, and such as dams like the massive structure the mass concreting technique used is known as mass concrete.

The low slump and large size of aggregate are used in mass concrete to reduce the amount of cement in the concrete.

In mass concrete, to obtain a durable structure with more economy, the mass concrete should be properly designed, placed, and cured.

In mass concrete to restrained volume change associated with a decline in temperature as the heat of hydration is dissipated, the significant tensile stress and strain may result.

To prevent shrinkage, one must have excellent control of early setting the mass concrete intended for a large structure.

Mass Concrete Underpinning:

In controlled stages, mass concrete slab is the most common form of underpinning and involves excavating to a depth where suitable bearing strata exists.

This process is crucial as it is the most important characteristic of mass concrete that differentiates its behavior from that of structural concrete.

In mass concrete, before the next ‘pin’ is excavated, The first excavation is filled with concrete and allowed to cure.

Between the new and old foundations, a dry sand cement packing mortar is rammed form transferring the building load to the new pin.

For shallow depth underpinning, this method is suitable.

Also, Read: What Is a Concrete Vibrator | 6 Types of Concrete Vibrators | Concrete Vibrator Alternatives | Advantages of Concrete Vibrator | Disadvantage of Concrete Vibrator

Some Techniques of Mass Concrete Underpinning:

  • The underpinning technique, often discussed in mass concrete ppt, involves existing footings down to a greater depth where stable soil of a suitable bearing capacity exists
  • A failing section of the building by extending the construction of a new foundation beneath.
  • In a pre-determined sequence, the mass concrete is achieved by excavating individual bases in short lengths.
  • After excavated to the appropriate depth, and before concreting, supervisory staff and building control, inspect the excavation that the ground is free from soft spots, tree roots, etc.
  • The base is backfilled with concrete when the excavation has been approved; shutters are set in position.
  • Between the underside of the footing and the top of the base, the concrete is usually cast to leave a narrow gap.
  • When underpinning is constructed in shrinkable clay, low-density polystyrene is usually installed.

Also, Read: 9 Types of Curing | What Is Curing of Concrete | Why Curing Is Important | Minimum Curing Period for Concrete Cement | How Long Does It Take for Concrete to Dry

Useful Article for You

Properties of Mass Concrete:

Properties of Mass Concrete:

The properties of mass concrete are below.

  • Workability.
  • Water Tightness.
  • Durability.
  • Strength.

1. Properties of Mass Concrete: WorkabilityWorkability

An essential property of mass concrete is workability.

To produce full compaction, the workability determines the amount of useful internal work necessary.

For mass concrete works, uniformity of workability is essential.

And the economy of mass concrete generally requires low cement content. For mass concrete, workability should be optimum.

2. Properties of Mass Concrete: Water TightnessWater Tightness

For hydraulic structures such as dams, large bridge piers, and foundation, for the massive structure, Watertight ness is an important property of concrete.

To the concrete mix to improve water tightness, some pozzolana should be added.

By using good quality aggregate, low water-cement ratio, good consolidation during placing, and proper curing, Lean mixes used in mass concrete.

Concrete should be impermeable, and also this can achieve.

3. Properties of Mass Concrete: Durability Durability

The prevention ability of concrete from chemical attack, weathering action, and abrasion is known as durability.

The durability of concrete depends upon some factors like mix design, workmanship, placing, and curing.

A properly cured and concrete with a low water-cement ratio correctly consolidated provides durable concrete. By careful selection of materials, we can improve the chemical resistance of concrete.

And by entrainment of a minute are bubbled into the concrete weathering durability can be improved.

4. Properties of Mass Concrete: StrengthStrength

To avoid failure, the strength of concrete defines as the resistance that concrete provides against a load.

Instead of ordinary cement concrete, Sometimes it is economical to add pozzolana or use portland pozzolana cement.

The strength of mass concrete depends on the water-cement ratio, quality of aggregates, compaction, curing, etc.

The plasticity and workability of concrete also increase by pozzolana.

Also, Read: Concrete Release Agent | Functions of Releasing Agents | Types of Concrete Release Agent | Advantages of Release Agent | Concrete Form Release Oil

Mass Concrete Specification:

Mass Concrete SpecificationThe definition of mass concrete specification is that it is defined as having dimensions large enough to require measures to be taken during mass concrete construction.

Large size aggregates are preferred for mass concrete; it is concrete with a higher proportion of cement with a lesser proportion of cement.

Large bridge piers, foundations, and such as dams like the massive structure, the mass concreting technique is used. The temperature shrinkage is the major problem in mass concrete work.

To prevent shrinkage, one must have excellent control of early setting the mass concrete intended for a large structure.

Materials Are Used for Mass Concrete.Materials Are Used for Mass Concrete.

  1. Portland Cement with Low Heat of Hydration.
  2. Pozzolanas.
  3. Aggregate.
  4. Admixture.
  5. Mixing Water.
  6. Coolants.

1. Portland Cement with Low Heat of Hydration:

Portland Cement with Low Heat of HydrationTo achieve the desired strength for both heat of hydration and the minimum economy amount of portland cement should be used.

2. Pozzolanas Used for Mass Concrete:

Pozzolanas Used for Mass ConcreteTo reduce the heat of hydration, workability, and delayed strength gain, some pozzolanas should be added.

3. Aggregate Use for Mass Concrete:

Aggregate Use for Mass ConcreteThe size of 20-30 mm aggregate is suitable for large beams and columns in the case of structural concrete.

A 40 mm aggregate can use for dams. If the fine aggregate to the total aggregate ratio should below.

4. Admixture Use for Mass Concrete:

Admixture Use for Mass ConcreteFor the mass concrete retarding and the water-reducing admixture is very useful.

After the addition of superplasticizers, Mass concrete to the pump should provide with high range water reducing and retarding admixture to provide 12-18 mm.

5. Mixing Water for Mass Concrete:

Mixing Water for Mass ConcreteTo provide a low slump, a low quantity of water should be added to mass concrete.

6. Coolants for Mass Concrete:

Coolants for Mass ConcreteIn hot weather conditions, coolant for the Temperature of the mass concrete dam should be controlled between 5C and 20C.

The water will help when the addition of finely chopped ice instead.

Also, Read: Deshuttering Time | When to Remove Concrete Forms | Concrete Formwork Removal Time | Earliest Time to Remove Concrete Forms | When To Strip Concrete Forms

Mass Concrete Foundation:

Mass Concrete Foundation:

A mass fill foundation, also known as a mass concrete foundation, is defined as having dimensions large enough to require measures to be taken.

This is essentially what is mass concrete and where it is used.

Large bridge piers foundation, and such as dams like the massive structure the mass concrete is used.

The heat of hydration of mass concrete is more than of other concrete because of the large amount of concrete.

To cope with the generation of heat from the hydration of the cement and attendant volume change to minimize cracking.

The temperature shrinkage is the major problem in mass concrete foundation work.

Also, Read: RCCFull Form | What Is RCC | Advantages & Disadvantages of Reinforced Cement Concrete | Properties of RCC | What Does RCC Stands for

How Much Mass Density of Concrete?

A mass density of concrete is a normal concrete weight is 2400 kg per cubic meter.

The water and cement content, amount of entrained air, and the density of aggregate upon these factors, the density of mass concrete is depending.

For the lightweight concrete, the density is 1920 kg per cubic meter and cubic foot 116 lbs.

It contains the concrete weight can vary depending on the air and moisture content.

How to Mass Concrete Temperature Monitoring?

The mass concrete temperature we can monitor in two ways that’s are below.

  • To monitor the temperature of mass concrete, low heat of hydration cement or blended such as PCC or is are being.
  • To monitoring temperature of mass concrete large size aggregate 75 to 150 mm and high aggregate content up to 80% of total aggregate.
  • Use of ice flakes up to about 70% of mixed water, pre-cooling of mixed water.
  • By circulating very cold water through an embedded thin steel pipe.
  • Leading to heat loss use aggregate having higher thermal diffusivity, which results in a lower maximum temperature.

Also, Read: What Is Shotcrete | Shotcrete & Concrete | Shotcrete Technology | Types of Shotcrete Technology | Advantages of Shotcrete | Disadvantages of Shotcrete

Useful Article for You

Advantage of Mass Concrete:

Advantage of Mass Concrete

There have been many mass concrete advantages and disadvantages.

Some of the advantages are listed below

  1. The solid structures above 80cm are made of mass concrete.
  2. The mass concrete frequently contains a large volume of concrete.
  3. It’s an advantage that the large volume can set in a short time.
  4. Another advantage of mass concrete is where large bridge piers, foundation, and such as dams like the massive structure the mass concreting technique is used.
  5. In mass concrete, to obtain a durable structure with more economy, mass concrete is used.
  6. Another advantage of mass concrete is to restrained volume change associated with a decline in temperature as the heat of hydration is dissipated.
  7. To prevent shrinkage, one must have excellent control of early setting the mass concrete intended for a large structure. This is an important advantage of mass concrete.

Also, Read: Sugar in Concrete | Effect of Sugar on Concrete Strength | Sugar as a Concrete Surface Retarder | Addition of Sugar in Concrete Results in Setting Time

Disadvantage of Mass Concrete:

Disadvantage of Mass Concrete

There are have many disadvantages of mass concrete as like advantages. That’s below-

  1. The disadvantage of mass concrete is the water-cement ratio reaction; the temperature rises within a large concrete mass.
  2. The second disadvantage of mass concrete is the temperature shrinkage is the major problem in mass concrete work.
  3. With the use of a large quantity of concrete, the structure construction cost will be increased. This is a common disadvantage of mass concrete.

Also, Read: What Is Modulus of Rupture | What Is Flexural Modulus | What Is Flexural Stress | Flexural Strength of Concrete | Bending Modulus | What Is Flexural Strength

FAQ

Mass Concrete:

Mass concrete is any volume of concrete with dimensions large enough to require that measures be taken to cope with the generation of heat from hydration of the cement and attendant volume change to minimize cracking. The one characteristic that distinguishes mass concrete from other concrete work is thermal behavior.

What Is Mass Concrete?

Mass concrete is defined by American Concrete Institute Committee 207 as “any volume of concrete with dimensions large enough to require that measures be taken to cope with the generation of heat from hydration of cement and attendant volume change to minimize cracking.”

Mass Concrete Underpinning:

Mass concrete is the most common form of underpinning, and involves excavating a segment of ground below the existing building foundation in controlled stages, to a depth where suitable bearing strata exists. The excavation is then filled with concrete and allowed to cure before the next ‘pin’ is excavated.

Also, Read: What Is Tie Beam | Tie Beam Details | Advantages of Using Tie Beam | Tie Beam Reinforcement | Why Are Use Concrete Tie Beam

Properties of Mass Concrete:

Mass concrete is defined by the American Concrete Institute as: “any volume of concrete in which a combination of dimensions of the member being cast, the boundary conditions, the characteristics of the concrete mixture, and the ambient conditions can lead to undesirable thermal stresses, cracking, deleterious chemical.

Mass Concrete Specification:

Structural mass concrete is defined as any concrete footing with a least dimension greater than 5 feet (1.5 m) or other concrete placements with a least dimension greater than 4 feet (1.2 m). Additional constraints are required on placements with a least dimension greater than 6.5 feet (2 m).

Mass Concrete Foundation:

Mass concrete is defined by American Concrete Institute Committee 207 as “any volume of concrete with dimensions large enough to require that measures be taken to cope with the generation of heat from hydration of cement and attendant volume change to minimize cracking.”

Also, Read: What Is Concrete Resurfacing | How to Resurface Concrete | Concrete Resurfacing Material | Concrete Repair and Resurfacing

How Much Mass Density of Concrete?

As for concrete itself, the density of concrete of normal weight is about 2,400 kg per cubic meter or 145 lbs. per cubic foot.

How to Mass Concrete Temperature Monitoring?

  1. Cold Weather T = [0.22(TsWs + TaWa + TcWc) + TwWw] / [0.22 (Ws + Wa +Wc) + Ww]
  2. Hot Weather T = [0.22(TsWs + TaWa + TcWc) + TwWw ¡V 112Wi] / [0.22 (Ws + Wa + Wc) + Ww + Wi]
  3. Transportation Temperature Factors (For revolving drum mixers) T = 0.25 (tr-ta)
  4. Transportation Temperature Factors (For covered dump body) T = 0.10 (tr ¡V ta)
  5. Transportation Temperature Factors (For open-dump body) T =  0.20 (tr ¡V ta)

Advantage of Mass Concrete:

Mass concrete is made with solid structures (> 80 cm). These structures frequently contain a greater volume. It signifies that large volumes of concrete should be set up in a short time. It needs highly well-organized planning and competent methods.

Also, Read: 6 Different Types of Concrete Finishes | 7 Types of Wall Finishes | How to Finish Concrete | 3 Types of Concrete Finish Machines | 14 Types of Concrete Finishes for Driveways

Disadvantage of Mass Concrete:

Disadvantages of this system include: There are large amounts of excavated material to be disposed of. There are large amounts of concrete to be imported to construct the bases. Excavations and bases are difficult to construct in unstable or water-logged ground.

Mass Per Unit Volume of Concrete:

Concrete Volume Weight Chart:
Unit Kilogram Pound
cubic meter of concrete 2,406.53 kg/m^3 5,305.49 lb/m^3
cubic yard of concrete 1,839.92 kg/yd^3 4,056.34 lb/cu yd
cubic foot of concrete 68.15 kg/ft^3 150.23 lb/cu ft

Which Material Used in Mass Concrete?

Mass concrete is basically concrete with a higher proportion of coarse aggregate and a lesser proportion of cement, Large size aggregates are preferred for mass concrete. Strength, economy, uniformity, and all other factors considered for normal concrete should take into account for also mass concrete.

Where Is Mass Concrete Used?

Mass concrete is usually associated with large, poured in-situ concrete structures such as dams, bridge piers, foundations to very tall buildings and other large volume placements which are at least 1m-deep. In many cases, mass concrete is unreinforced and therefore strong in compression but weak in tension.

What Size Is Mass Concrete?

If you know the density, the mass per unit volume of a material (such as concrete), and the volume of the material, you can multiply the density times volume to determine the mass, and, from there, the weight.

What Is the Purpose of Mass Concrete?

Mass concrete is any volume of concrete with dimensions large enough to require that measures be taken to cope with the generation of heat from hydration of the cement and attendant volume change to minimize cracking.

Like this post? Share it with your friends!

Suggested Read –

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top