How to Use Rate Analysis for Dry Lean Concrete Calculator | Rate Analysis for Dry Lean Concrete | Material Calculation in Rate Analysis of Dry Lean Concrete

What Is Rate Analysis?

The basis of arriving at a correct and reasonable rate per unit. Work or Supply for a particular item following its specification and detailed survey of materials, labour, equipment, etc. as required for the unit work and their prevailing rates may be called an analysis of rate.

How to Use Rate Analysis for Dry Lean Concrete Calculator

Step – 1. Select Area in Qty of Concrete

First Enter your Rate analysis area in Cu.m. as per shown in the below picture.

Step – 2. Concrete Ratio (Grade of Concrete)

Enter your Concrete ratio as per shown in the below picture. (Cement and Sand ratio in  Two cells Third cell count directly from sand time 2 is Aggregate ratio of concrete)

Step – 3. Fill Labour Charges

Enter your labour charges rate like Mason 1st, Mason 2nd, Bhisti, Coolie, and Mate as per shown in the below picture. ( Mason, Bhisti, and Coolie in different cells)

Step – 4. Fill Material Rate as Per Actual

Enter your material rate like cement, sand, and Aggregate as per shown in the below picture. ( Enter cement, sand, Aggregate 20mm, Aggregate 10mm, and Admixture all are in different cells)

`

Step – 5. Additional Cost in Rate Analysis

Check your further details like wastage percentage, other extra charges, water charges, and contractor profit percentage. If any are changed as per your requirement than a change in cells that are shown in below cells.

Step – 6. Final Report of Rate Analysis for Dry Lean Concrete

After completing the above steps you can check your Rate Analysis for Concrete Report in the second tab of Rate Analysis for Concrete.

Step – 7. Use Print Button for Print.

If you required to print your plastering work calculation you can use the print button option.

Also, read: Brick Masonry Calculator | Brick Masonry Calculator | Size of Bricks | Calculate Brick Work

[the_ad id=”39531″]

Rate Analysis for Dry Lean Concrete Calculator

Material Calculation in Rate Analysis of Dry Lean Concrete

Like Cement, sand, aggregate, and reinforcement

Cement Calculation

Dry Cement volume = 1.33 convert Wet cement.(The concrete mortar dry volume of concrete decrease volume of dry cement mortar, so 1.33 time of dry mortar)

So, Cement calculation requirement of cement = 1 x 1.33 = 1.33 cu.m,

Herer calculation concrete ratio 1:1.5:3

The required amount of Cement quantity at concrete = 1.33 Cu.m. x (1/(1+1.5+3))

= 1.33 x 0.1819

= 0.242 cu.m. cement requirement

Cement in k.g. = volume x density cement

Cement in k.g. = 0.242 cu.m. x 1440 (1440 kg/m Density of cement for 50 k.g)

= 0.242 x 1440 = 425.646 kg of cement of bag requied ment of cement in k.g.

= 348.48 / 50 (one cemnent bag weight 50 k.g. only) = 6.96 bag

So, 10 cu.m. concrete requirement of cement = 6.96 bag x 10 cu.m. = 69.64 bag

Sand Calculation

• Required amount of Sand = 1.33 Cu.m. x (1.5/(1+1.5+3))
  • =0.363 Cu.m. requierd of sand for 1 Cu.m.
• So,
  • 10 cu.m. concrete requirement of sand = 0.363Cu.m x 10 cu.m. = 3.63 cu.m.

Also, rate: Instrumental Errors in Leveling | Type of Errors in Leveling

Aggregate Calculation

• The required amount of Aggregate
  • = 1.33 Cu.m. x (3/(1+1.5+3))
  • =0.725 Cu.m. required of sand for 1 Cu.m.
• So,
  • So, 10 cu.m. concrete requirement of sand = 0.725 Cu.m x 10 cu.m. = 7.25 cu.m.
  • Two types of aggregate like 20 mm & 10 mm size. this ratio 60 % of total aggregate 20mm size, 40 % of total aggregate 20mm size
  •  20 mm aggregate = 7.25 cu.m. x 60% = 4.35 cu.m. 20 mm size aggregate
  • 10 mm aggregate = 7.25 cu.m. x 40% = 2.9 cu.m. 20 mm size aggregate

Also, read: What is Bitumen And Bitumens Types

Labour for Rate Analysis of Dry Lean Concrete

As per calculation of rate analysis in labour consumption per Cu.m. requirement as per our experience or CPWD book, this book public by the Central Public Works Department, Government of India for easy calculation of the rate analysis, etc.

As CPWD Mate per cu.m. 1.2 of day bhisti, per cu.m 1.2 of day coolie, per cu.m. 0.3-day Mason -2nd,

Extra Work Calculation in Rate Analysis of concrete

Extra Changes in rate analysis as per below

Wastage Extra 2%

Hire and Running Charges of Mech Mixer 5%

Transportation Cost 1%

Other Charges 2 % Extra (Electrical, and site extra expense)

Add for Water Charge @ 1% on Items Marked

Add for Contractor’s Profit @15% on Items Marked

Video tutorial for better understanding: