Shotcrete Vs Gunite | What Is Gunite | Advantage & Disadvantage of Guniting Process | What Is Shotcrete | Advantage & Disadvantage of Shotcreting

Introduction of Shotcrete Vs Gunite

• Shotcreting, often referred to as gunite vs shotcrete, and Guniting are one of the most important and widely used techniques in construction. Many might wonder about the difference between shotcrete and guniting.
• The purpose of using the shotcrete and Guniting method is the same but the process of application is different.
• Guniting and shotcreting are both different techniques. Many people do not know the difference between Guniting and shotcreting.
• Sprayed concrete is widely used in the construction of tunnels, underground structures, slope stabilization, structural repairs, and swimming pools
• In this article, you will get to know about the guniting and shotcreting process and the difference between Shotcrete and Gunite.

What Is Guniting?

• Guniting, sometimes referred to as guniting work, is a technique that consists of the pumping of mortar or concrete at a high velocity through a hose or spray gun to apply on the surface. This technique is often used in guniting wall construction.
• The Guniting process, which some might know by the guniting meaning, is also known as Dry Shotcreting. It is a process of spraying a mix of mortar or concrete at high pressure to the surface with the help of spray gun.
• Guniting is one of the most effective techniques which is widely used for the repairing of the concrete which is damaged.
• Guniting process is used in the slope stabilization dome construction of retention walls water tanks and pools etc.
• The process of converting has wide applications such as the strengthening of old structures, lining of the reservoir and canal, waterproofing of the surface which come directly with the contact of water.

Also, Read: What Is Guniting | Set Guniting Systems | Advantage | Disadvantage

Useful Article for You

• What Is a Contour Interval
• What Is Tile
• What Is the Difference Between a Shower Pan and a Shower Base?
• What Is Raft
• What Is a Window Panel
• What Is a Frame Structure
• What Is the Measurement for a Queen Size Bed
• What Is Considered Livable Space
• What Is One Way You Can Save Electricity?
• What Is Mdf Mean
• What Is a Bundle of Shingles
• What Is a Gallon of Water Weigh
• What Is Overhang
• What Is Sand Blasting
• What Is a Span Bridge
• What Is a Soil Stack
• What Is the Little Black Diamond on a Tape Measure
• What Is a Louvered Door
• What Is a Spread Footing
• What Is Leveling

Advantage of Guniting Process:

The various advantages of guniting process are as follows

• The Guniting process is economical as compared to other types of method.
• The dry mix can be prepared quickly as compared to the wet shotcreting mix.
• The guniting process is used in swimming pools and artificial caves to provide special shapes and features.
• The High compressive strength of the concrete can be obtained with guniting process.

Also, Read: Tributary Area | Tributary Area Examples | Tributary Width | Tributary Load | Tributary Area in Columns | Overview of Tributary Area

Disadvantage of Guniting Process:

The various disadvantages of Guniting process are as follows

• The dry mix of concrete can clog or block the hose pipe during the application of concrete.
• The process of Guniting required a skilled operator.
• The quality of the work depends upon the operator.
• In this method, there may be chances of wastage of concrete.

Also, Read: Types of Roof Tiles | Tile Roof Replacement | Tile Installation Cost | Roofing Tile Price | Ceramic Tile Price Per Square Foot | Tile Installation Factors

What Is Shotcrete?

• The term Shotcrete, which can be understood by the guniting meaning in hindi for some, itself says that it is a technique in which the concrete is shot out through the hose is known as Shotcrete.
• Shotcrete is sprayed on the surface through a hose at a high velocity. Shotcrete is used with both wet mix as well as dry–mix
• Shotcrete can be done with both dry mix or wet mix. Shotcrete is placed and compacted properly.
• Dry mix process for shotcreting, in which water is added to the concrete mix at the nozzle.
• Wet mix process involves the mixing of all the ingredients required for concrete. In the case of wet-mix shotcrete process, the water content is controlled more accurately as compared to the dry-mix method.
• Shotcreting is the best method in which the concrete mix is applied in layers under the pressure of compressed air.
• The water cement ratio for shotcrete normally ranges within 35 to 0.50 by mass which is somewhat lower than for most conventional concrete mixes.
• Shotcreting process is done with the special unit which consists of a mortar gun. The dry mix of cement sand and aggregate is prepared in the appropriate proportion for the process of shotcreting.
• There are different types of shotcreting machines are available which help to control the complete process and make it easy.
• The Shortcrete is widely used for the repairing of the structure and earthquake damage. Shotcreting method is very helpful in underground mining.

Also, Read: What Is Shotcrete | Shotcrete & Concrete | Shotcrete Technology | Types of Shotcrete Technology | Advantages of Shotcrete | Disadvantages of Shotcrete

Useful Article for You

• Moment Frame
• Monolithic Slab
• Zero Force Members
• How Much Does a Yard of Concrete Weigh
• Cmu Wall Meaning
• Gradient Road
• Pile-Cap
• Budget Sunroom Ideas
• What Is Gypsum Board
• Types of Vaulted Ceilings
• Well Points
• How Does Baking Soda Remove Blood from Carpet
• What Are Forms in Construction
• How Heavy Is Dirt
• Tender Meaning in Architecture
• Dark Olive Green House
• Cast in Place Concrete
• Lean to Roof
• What Is a Pitched Roof
• How Tall Is an Average Door

Advantage of Shotcreting:

The various advantages of shotcreting process are as follows

• The process of shotcreting forms a strong and uniform layer of concrete on the surface.
• The shotcreting process is more economical as compared to conventional concrete which required formwork.
• Shotcreting is suitable for the construction where the formwork cannot be installed.
• The concrete can be applied to one nozzle from a safe distance.

Also, Read: What Is Concrete Resurfacing | How to Resurface Concrete | Concrete Resurfacing Material | Concrete Repair and Resurfacing

Disadvantage of Shotcreting:

The various disadvantages of shotcreting process are as follows

• The concrete in the process of shotcreting is premix so that it is necessary that it has to be applied quickly.
• There may be chances of developing crack if more water is added in the premix concrete.
• The process of shotcreting is a little bit expensive as compared to guniting process.

Also, Read: What Is a Partition Wall | Uses of Temporary Interior Wall | Walling Materials | Types of Interior Wall Materials | Types of Partition Walls

Difference Between Shotcrete and Gunite

The difference between shotcreting and Guniting are as follows

Also, Read: What Is Fire Escape Staircases | Types of Fire Escaping Stairs | What Is the Importance of Fire Escape in the Building | What Are the Fire Staircase Requirements