All You Need to Know About Sliding Windows: Types, Installation, Replacement, and Pros & Cons

Introduction of Sliding Windows

It is easier to open and close a strategically oriented small window to capture current winds.

This window plays a major part in the home’s natural ventilation. Such windows are helpful in drastically reducing summer air conditioning bills.

A similar window is a sliding window, also called a “slider window”. Sliding windows are very useful to help bring fresh air to freshness. The sliding window can provide more natural light at home.

What Is Sliding Window?

Important Point

The sliding window is a set of glass panes that can open horizontally from one side to the other. No additional space is needed to scroll and operate on the track.

The sliding window can provide smooth and controlled access to fresh air and light where the porch, a tight walkway, or anywhere can be installed outside. This can provide excellent energy efficiency when the window is closed.

Sliding contemporary and modern style windows has clean lines and attractive designs. They contain large panels of unpaid glass to fit horizontal areas on the wall.

These windows offer a sophisticated and timeless look with grills that can be neatly combined with more traditional homes.

This window is also called a slider window, gliding window, horizontal sliding window, or sliding sash window.

Also, Read: All About Casement Window

Types of Sliding Windows

1. Horizontal Sliding Windows

The horizontal slider window can be opened on the left or right side of the sash on the track. It is easier to open and close a sliding window than any crank-style window.

The horizontal slider window is popular in contemporary-style homes. The window also satisfies the need to get out of the room.

The horizontal sliding window often has more than two panels that provide more space for ventilation.

2. Vertical Sliding Windows

A vertical sliding sash window means nothing but a double-hung window. Some call it a vertical sliding window while some call it a double-hung sliding window.

Vertical sliding windows usually have only two sliding panels but in some cases, there may be more than two glass panels while double-hung sliding windows have only two panels.

Useful Article For You

Sliding Windows Sizes

The size of the standard horizontal sliding window is 36-inch, 48-inch, 60-inch, 72-inch, and 84-inch. The standard vertical sliding window is 24 inches, 36 inches, 48 inches, and 60 inches long.

Also, Read: Types of Arched Windows | What Is Arched Window?

Sliding Window Installation

The window needs to be installed properly to get the best out of it. Sliding windows should not be installed as a DIY project. It is advisable to seek the help of a professional to install windows.

Here are some things to keep in mind when installing sliding window.

Expansion or spray-in foam products should not be used. If you use one of them, be careful to keep the jam straight so that the window operation is not interrupted.
If we use external items of brick or stone, a distance of 1/8 “should be kept from the window to allow the expansion of brick and mortar.
Baker Road and Silicon Caulk should be used to seal the gap. Brick washing should not be used after installing the window as doing so cancel the window warranty.
The window should not be pants and the window should not be kept at a place where the temperature exceeds 140 ° F as doing so can cancel the window warranty.

Sliding Window Price

The average cost of installing a single sliding window ranges from $ 450 to $ 1000. Installing double aluminum sliding windows with double-pane glass can cost about $ 700.

A small single-pen vinyl sliding window of the 36 “x 24” size can be installed at a cost of $ 400. The large triple-pan 48 “x 60” steel sliding window can be found for $ 1,750.

This window depends on the total cost size, frame material, and additional features for installation.

Also, Read: Awning Window | What Is Awning Window? | Benefits of Awning Windows

Sliding Window Replacement

We will first look at the process of sliding window glass replacement.

Sliding Glass Window Replacement

1. Clean Broken Glass

A broom and dustpan should be used to collect large pieces of broken glass. A piece of rag should be used to avoid injuring the hand while lifting this broken glass. A vacuum cleaner should be used for small pieces of glass.

2. Check for Damage in the Casement

The entire casement should be checked to determine if there is any other damage. A screwdriver is required to remove the casement if the slider is tilted or otherwise damaged.

A hammer can be used to straighten the slider. Appropriate force must be applied to the slider as excessive force can be responsible for dents.

3. Remove the Glass

The broken glass needs to be replaced. The entire glass can be removed by removing all screws located at the top as well as at the bottom of the frame.

Gradually remove the screws one by one and separate the frame so that the glass does not fall down and is not damaged in any way. Gaskets should be used to check for any signs of damage.

4. Replace the Glass

A screwdriver should be used to remove the window sash of the frame. The glass should be carefully slid and re-secured with screws.

Some windows require caulk to completely seal the frame. A utility knife should be used to remove the existing caulk.

Now we will see the process of changing the sliding window sash.

Useful Article for You

Sliding Window Sash Replacement

Casement window repair can be done in many different ways. The scarf may be pulled loose due to age or poor installation.

A pull is a handle that is usually attached by a screw. It is attached to the inner scarf at the bottom, on both sides, and at the midpoint.

1. Move the Sash Pull

The sash pull can be moved by pulling if it is located in a bad part of the wood. It should be located in a solid clean piece of wood.

Keep it centered on the bottom of the sash as much as possible so that there is no uneven pressure on the sash when opening and closing.

The holes should be filled with crack filler and the matching area should be repainted. It is unlikely that the wood is slightly rotten as it is inside the window. Yet a compound designed to replace rotten areas can be used to remove the rot.

2. Replace the Screw

A few longer screws should be used if the pull remains in place and the strength is increased. They should also not be long enough to protrude from the other side or damage the glass.

A wide screw should be used if there is any play between the pull and the screw opening in the screw. This happens if the wrong size screw was used during the initial installation.

3. Glue the Screw

If the bridge is never to be removed in the future, it should be glued inside. Remove the screw and fill the hole with some wood glue, and then screw the unit back into place.

Be careful that this is clamped so that it does not move. It is necessary to let it dry completely before use.

4. Filling the Hole

The hole can be filled with a wood filler and once it is dry the screw should be put back into the filler. Various items can also be used to fill the hole when we screw the screw in again. For example, using wooden toothpicks or a very thin dowel.

Also, Read: Comparison Between Bay Windows and Bow Windows

Sliding Window Replacement Cost

The standard-size sliding window replacement costs can range from $ 400 to $ 700. Changing to a full-sized sliding glass window costs from $ 1000 to $ 2500.

Custom Sliding Windows

The “standard” size windows of sliding windows are seen in most places. The possibilities of the windows available in the off-the-shelf size at the local Big Box store are very low.

The custom window is specially made to open the right size window for the home. The custom window can be created to fit the opening of any size without structural disturbance.

Therefore they usually provide very ease of installation, and the original architect’s intended look is found.

Advantages of Sliding Windows

Here are the sliding windows’ pros as follows.

1. Ease of Work

Due to the nature of their design, the sliding window is easy to open and close as it can easily slide with a window frame. The sliding window can be opened with a latch mechanism and is also easy to close because they are lighter because they are sliding.

2. Increase in Ventilation and Sunlight

This window is good for excess sunlight and airflow. While other types of windows are difficult to use. Due to the smooth design of the sliding window, they choose the kitchen sink or other areas of the house where strength is not possible.

3. Very Little Mechanical Maintenance

The traditional window can have many parts while the slider windows contain only a few parts. This siding makes Windows the best option as it is practically maintenance-free and cost-effective.

Disadvantages of Sliding Windows

Here are the sliding windows’ cons as follows.

1. Cleaning of Outside

The only drawback of the sliding window is that it is difficult to clean it out of the house. Cleaning windows can be difficult if the sliding window is installed on the second floor. The need to buy a long-handled glass cleaning tool for cleaning the outside area.

2. Operation

In winter in the icy area, sliding tracks can be filled with snow, making it difficult to open and close the window.

3. Energy Efficiency

The contact point between the sliding sash in this window is not always closed. Some windows are more susceptible to high winds and this causes drafts.

To make the sliding window as efficient as a casement or moon window, the triple glazed option has to be resorted to increasing the cost of the window.

FAQ

What Is a Sliding Window?

A sliding window is a type of window consisting of glass panes that open horizontally from one side to the other without requiring additional space to operate.

What Are the Different Types of Sliding Windows?

Sliding windows come in two primary types: horizontal sliding windows that open from left or right sides, and vertical sliding windows (double-hung windows) with two sliding panels.

What Are the Standard Sizes for Sliding Windows?

Standard sizes for horizontal sliding windows range from 36-inch to 84-inch widths, while vertical sliding windows are available in lengths of 24 to 60 inches.

How Should Sliding Windows Be Installed?

It’s recommended to have sliding windows professionally installed. Avoid using foam products, maintain a distance from brick or stone, use proper sealing methods, and avoid exposing the windows to extreme temperatures.

What Is the Cost of Installing or Replacing Sliding Windows?

Installing a single sliding window may cost between $450 to $1000, while larger or specialized sliding windows could range from $700 to $1750 or more, depending on size and materials.

What Is Involved in Sliding Window Replacement?

Sliding window glass replacement typically involves cleaning broken glass, checking for casement damage, removing and replacing glass panels or sashes, and sealing the frame properly.

What Are the Advantages of Sliding Windows?

Sliding windows are praised for their ease of use, ventilation, abundant sunlight, and low mechanical maintenance due to their simple design with fewer parts.

What Are the Disadvantages of Sliding Windows?

Challenges include difficulty cleaning the exterior, potential issues with operation in icy conditions, and concerns about energy efficiency due to potential drafts.

How Can Sliding Windows Be Made More Energy-Efficient?

To enhance energy efficiency, options like triple glazing may be considered, although this might increase the cost of the window.

Can Custom Sliding Windows Be Made for Specific Home Needs?

Yes, custom sliding windows can be designed to fit specific sizes without disrupting the home’s structural integrity, offering ease of installation and preserving the intended architectural aesthetics.

Like this post? Share it with your friends!

Suggested Read –